VSystem

Refined High-Fidelity Audio

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

Audio-Technica AT-LPW50PB Turntable Setup

The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Stunning Look, Stunning Sound

Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.

Designed for a Higher Level of Listening

The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

Features

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish
• High-isolation, height-adjustable feet
• Built-in switchable phono preamplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

What's in the box?

• AT-LPW50PB turntable
• 45 RPM adapter
• Removable hinged dust cover
• Rubber mat
• Dual RCA (male) to dual RCA (male) stereo cable
• AC adapter (approx. 1.5 m)

Technical information

• Type: Belt-drive manual turntable
• Motor: DC servo with Active Speed Stabilization
• Drive Method: Belt drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Die-cast aluminum
• Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio: >60dB
• Output Level:
  Pre-amp "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec
  Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.
• Dimensions:
  With dustcover: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 126.0 mm (4.96") H
  Without dustcover and hinges: 420.0 mm (16.54") W x 356.0 mm (14.02") D x 114.0 mm (4.49") H
• Weight: 5.56 kg without dust cover
• Tonearm type: Static balanced straight carbon tonearm
• Effective arm length: 223.6 mm
• Overhang: 18.6 mm
• Tracking error angle: <2 degrees
• Applicable cartridge weight: 12-17 g
• Stylus pressure adjustment range: 0-3 g
• Replacement Stylus: AT-VMN95E BK
• Tracking error angle: <2 degrees
• Applicable cartridge weight: 12-17 g
• Stylus pressure adjustment range: 0-3 g
• Replacement Stylus: AT-VMN95E BK