VSystem

Manual Belt-Drive Wood Base Turntable

The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

Audio-Technica AT-LPW30TK Turntable Setup

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Features

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Fully manual operation
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

What's in the box?

• AT-LPW30TK turntable
• AT-HS4SV Headshell
• AT-VM95C Dual Moving Magnet Cartridge with Elliptical Stylus
• Detachable RCA output cable (dual RCA male to dual RCA male)
• 45 RPM adapter
• Counterweight
• Rubber mat
• Removable hinged dust cover
• AC adapter

Technical information

Turntable

• Drive Method: Belt-drive
• Type: 2-speed, fully manual operation
• Motor: DC servo motor
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Die-cast aluminum
• Wow and Flutter: < 0.15% WRMS (33RPM) at 3kHz
• Signal-to-Noise Ratio: > 60dB
• Output Level:
  Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec
  Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec
• Power Supply Requirements: 100 to 240V, 50/60Hz
• Power Consumption: 220V 50Hz (EU)
  Working: 1.2W / Motor off: 1.1W / Power Off: 0.2W
• Dimensions: 116.9 x 420.0 x 340.0 (H x W x D mm)
• Weight: 5 kg

Cartridge & Stylus

• Model: AT-VM95C
• Type: VM Dual Magnet
• Output Voltage: 4mV (at 1.5kHz, 5cm/sec)
• Vertical Tracking Force Range: 1.8 to 2.2 g (standard 2.0 g)
• Stylus Shape: Bonded Conical Stylus
• Stylus Size: 0.6 mil
• Recommended Load Impedance: 47,000 ohms
• Replacement Stylus: AT-VMN95C

Headshell

• Model: AT-HS4SV
• Weight: 8.5 g

Tone arm

• Type: Static balanced straight aluminium tonenarm
• Effective Length: 223.6 mm
• Overhang: 18.6 mm
• Maximum Tracking Error Angle: Less than 2 degrees
• Stylus Pressure Adjustment Range: 0 to 3 g