VSystem

Compact & Versatile Audiophile Integrated Amplifier

Run a pair of your favorite speakers on the rear and a pair of headphones off the front panel. The included remote control covers all major functions from the comfort of your favorite listening chair.
Need more power in the future? Feed your power amplifier through the variable outputs, and you’re set.

The new MaiA S3

The MaiA S3 is the all-in-one solution for your Hi-Fi system. Not only the circuit design was reworked, also the case has been significantly changed and the MaiA S3 using Pro-Ject’s new S3 case. Due to the bigger size, the circuit board layout in terms of electromagnetical interference has also been inproved. With its 8 inputs you are ready for any kind of source device.

Versatile and Compact

The MaiA S3 offers eight inputs. Ready for digital or analog sources, wired or wireless – you’re covered. The phono section can handle MM, MI, or high output MC cartridges. Hook up your tuner or any other analog device to one of the three line-level RCA inputs. The DAC section allows a coax and two optical connections. The high definition aptX™ HD Bluetooth 5.0 wireless input allows streaming your favorite music via your phone.

Versatile In & Outputs

Phono, Line, Digital, Bluetooth 5.0
Use your favourite headphones or connect your speakers with the 4mm banana plugs and the low noise amplifier will do the rest. The variable RCA output also allows you to include a subwoofer in your setup.

aptX™ HD

Bluetooth 5.0
aptX™ HD with our new Bluetooth 5.0 chip will allow you convenient high resolution streaming from your smartphone.

Handmade in EU

Made in Europe by technicians, engineers and designers with decades of experience. Expert craftsmanship. Sustainable products with a long lifetime. Audiophile audio performance.

Features

• NEW premium S3 aluminium casework
• NEW Bluetooth 5.0 - aptX HD capable (24-bit, up to 48kHz)
• 2 x 40 watts @ 4 ohms
• Dual mono design principle
• 8 inputs (5x analog, 3x digital & 1x wirless BT)
• Cirrus Logic CS4344 24bit/192kHz Multi-bit Delta Sigma
• S/PDIF inputs support up to 24bit and 192kHz
• Phono MM, MI + high output MC input
• Analogue volume control with motor driven potentiometer
• 6,3mm jack headphone output
• Variable output for subwoofer or second zone amp
• Remote control included
• Rigid aluminium casing protects against interference
• Available in silver or black
• Made in Europe

What's in the box?

• MaiA S3
• Power supply
• IR remote control
• CR2032 battery for remote control
• Antenna for Bluetooth

Техническа информация

• Power output: 2x 23W / 40W at 8 / 4ohms (1% THD)
• Frequency response (20Hz - 20kHz): <-0,5dB @4ohm
• Channel separation: - 69dB at 10kHz
• Signal to noise ratio: 97dB (101dB-‚A‘ weighted) @4ohm
• THD: < 0,04% at 10W / 4 ohms
• Headphone amplifier: 2x 75mW at 32ohm (1%THD)
• Headphone output: 6,3mm jack (16 – 600ohms)
• Analogue inputs: 3x pair RCA, 1x phono MM (RCA)
• Digital inputs: RCA coax, 2 x Toslink, Bluetooth 5.0 (aptX)
• D/A-converter: Cirrus Logic CS4344 24bit/192kHz
• Variable output: 1x pair RCA
• Speaker connectors: 4mm Ø banana plugs, spades connectors or naked wire
• Power supply: 20V/3A DC;100 - 240V, 50/60Hz
• Standby Power consumption: < 0,5 watts
• Dimensions WxHxD: 206x55x153 (176mm with sockets)
• Battery remote control: 1 x CR2032/3V or CR2025/3V
• Weight: 1070 g without power supply