Musical Fidelity M3x Vinyl Phono Stage - Silver

Code: 9120097824592
Up to 14 days after order
Warranty:
2-Year
2735,00 лв
This product does not ship to United States.
Add To Wishlist
Add To Compare
Manufacturer Musical Fidelity

The M3x ViNYL is designed to be a limitless phono stage amplifier, offering straightforward connectivity with an input and an output that cannot be overloaded or limited in driving capacity. It supports both MM and MC cartridges with exact loading options. The M3x ViNYL provides state-of-the-art technical and sonic performance similar to the M6x ViNYL, but at a more accessible price point, capturing the essence of high-end audio.

Design Philosophy

Like its higher-end counterpart, the M6x ViNYL, the M3x ViNYL uses entirely discrete circuitry for better technical measurements and improved sound quality. It features one single-ended input and output.

The Advantage of Discrete Circuits

Discrete circuits consist of individual electronic components, such as resistors, capacitors, inductors, and transistors, unlike integrated circuits that use operational amplifiers (Op-Amps) in the signal chain. While Op-Amps are efficient and space-saving, extensive listening tests have shown that even the best Op-Amps lack the neutrality, naturalness, dynamics, and vividness characteristic of the Musical Fidelity sound. Discrete designs, though involving hundreds or thousands of components and a longer design process, deliver superior sound quality.

Toroidal Power Transformer

The M3x ViNYL features a special audio transformer with low core saturation to reduce electromagnetic radiation, crucial for proper phono amplifier operation. The combination of transformer placement, electromagnetic shielding, and a high signal-to-noise ratio ensures optimal performance. The M3x ViNYL also includes a proprietary power supply solution with zero standby power consumption, making it an environmentally friendly product.

Split Passive EQ

Unlike many phono stages that use a single equalization network in a global feedback loop, the M3x ViNYL employs split passive equalization in separate amplification stages without global negative feedback loops for its RIAA curve. This design ensures more accurate EQ curve representation, better impedance matching, and lower deviation from the ideal RIAA curve.

High-Tech Mechanical and Electrical Engineering - Hand Made in the EU

The M3x ViNYL features a steel chassis and a thick, heavy aluminum front plate, providing rigidity and isolation from outside interference. The large chassis design maximizes the distance between the power transformer and the amplifier section, maintaining high signal-to-noise ratios. The high manufacturing standards, including hand-wired electronics and a beautiful exterior finish, are achieved by producing the M3x ViNYL entirely in the EU.

Features

  • MM and MC input
  • Exact loading options for any cartridge
  • Fully discrete circuit board design
  • Special low core saturation toroidal transformer custom designed for phono stage requirements
  • Environmentally friendly with zero standby power consumption
  • Split Passive RIAA and DECCA EQ
  • Heavy aluminum front plate with steel chassis
  • Minimal electromagnetic interference from power supply to phono preamp
  • Large chassis design for significant distance between power transformer and amplifier section
  • Made in the EU

Technical information

MM Input

  • Frequency response: RIAA or RIAA/IEC ±0 .2dB
  • Input sensitivity: 5mV in for 500mV out (at 1 kHz)
  • Input impedance: 47KΩ
  • Input capacitance: 50-400pF selectable
  • Gain: 40 or 46dB with +6dB function
  • THD+N: <0.028%
  • Signal to noise ratio: 95dB
  • Crosstalk: better than 100dB

MC Input

  • Frequency response: RIAA or RIAA/IEC ±0.3dB
  • Input sensitivity: 500μV in for 500mV out (at 1 kHz)
  • Input impedance: 25Ω to 1,2KΩ selectable
  • Gain: 60 or 66dB with +6dB function
  • THD+N: <0.28%
  • Signal to noise ratio: 80dB
  • Crosstalk: better than 90dB

Output

  • 1 pair RCA: left and right 500mV nom 10V max

Input

  • 1 pair RCA

Power requirement

  • Mains voltages: 230V/115V; AC 50/60Hz
  • Consumption: 20 Watts maximum. 0W in standby)

Weight and Dimensions

  • Unit only, unboxed: 6.59 kg
  • In shipping carton & inc . accessories: 10.15 kg
  • W x H(incl. feet) x D(incl. terminals): 440 x 105 x 390mm

Standard accessories

  • Mains lead: 10 Amp IEC
Type:
Preamplifier
Application:
Turntable
Input connection:
Wired
Output connection:
Wired
Color:
Silver
EAN:
9120097824592
There are yet no reviews for this product.

Reviews and ratings can only be made by registered users who have purchased the product.